List of all products

790 000 ₽

OCS-3AM - A fully automated log lathe Lathe-type program-controlled, which allows to perform operations cylindering logs, milling installation and expansion joint, milling cups without operator intervention - the touch of a button (also possible to perform all operations in the manual mode).

670 000 ₽

OCS-2AM - A fully automated log lathe Lathe-type program-controlled, which allows to perform operations cylindering logs, milling installation and expansion joint without operatora- vsego pressing a button (also possible to perform all operations in the manual mode).

340 000 ₽

OCS-1M - It log Lathe type, intended for the manufacture of finished parts of the framework. With a single installation is performed directly into cylindering finished size, sample mounting and slot milling cups.

950 000 ₽

OCS-4AM - A fully automated log Lathe-type program-controlled, which allows to perform operations cylindering logs, milling installation and expansion joint without operatora- vsego pressing a button (also possible to perform all operations in the manual mode).

1 863 000 ₽

log lathe COBRA-400 designed for fast and high-quality production of finished parts made of logs log.

1 046 000 ₽

The MASTER Cylinder Complex is designed for the fast and high-quality production of finished parts of a rounded log house.

• A tool of 160-300 mm is included in the price
• Automatic cylindering mode
• High performance due to the separation of cylindering operations and cups selection

390 000 ₽

In the manufacture of houses on log lathe, there is no possibility of trimming the log, milled bowl angles, milled half-cup, and therefore, for these purposes was designed line optimization includes: log notcher UHS-2M power cutter FPS-2 and roller conveyors with marking area.

170 000 ₽

log notche for quality and quick cutting cups into pre logs. The machine has the ability to rotate the carriage for cutting cups angled mounting four, six, and octagonal log cabins

286 000 ₽

Log notcher allows you to quickly and easily cut the cup in round logs 160-400mm

130 000 ₽

TCS-2 -tortsovochny Machine intended for machining the transverse beams 90⁰.

285 000 ₽

TSPT-80 is designed for batch cutting of the board into a tare blank

45 000 ₽

TC-350 is a cutting machine designed for cross cutting of boards and beams at an angle of 90⁰.

780 000 ₽

Circular saw bench corner STS-550 - A machine with numerical control designed for fast and accurate ripping of round timber with the specified geometric dimensions.

1 250 000 ₽

UPT-250M - a machine for small log processing, transmission type, providing a low-grade sawing logs in a single pass

335 000 ₽

The band-saw unit LPU-900 is intended for the production of high-quality lumber of timber and planks of any thickness from roundwood.

390 000 ₽

The disk multisaw machine AMS-150 - is intended for sawing up of a two-, three-edged bar on a cut timber.

20 000 ₽

Mounting samozahvatyvayuschie mites - A special grip, designed for quick and easy installation of a wooden frame.

12 000 ₽

TOL-1 - This conveyor belt is designed to automatically remove sawdust produced during cylindering logs.

50 000 ₽

BUS-1 - This automatic control unit drives that can be mounted on the power cutter or log notcher.

30 000 ₽

Laser beam corrector position allows more accurate to put a log in the centers log lathe.

30 000 ₽

Sharpening machine It is designed for quick and easy sharpening straight and shaped (semi-circular) blades log lathe OCS-1, OCS-2A, OCS-3A . Due to the rotary conductor and any necessary adjustments achieved ideal geometry of sharpened knives.

5 000 ₽

To move the log
Price for 1m!!!

6 000 ₽

LTs-2 green spectrum laser, which can be installed as a target indicator on an PSM-2M cup-cutting machine or TTSS-2 tortsovochny machine

700 000 ₽

Building a "mini-crane KSRM-500" For convenience, the crane is equipped with radio remote control.

30 000 ₽

ZS-1000 is a universal sharpening device designed for rapid sharpening of saw blades and cutters of the UPT-250M machine. The same machine has the ability to sharpen saw blades in a wide range of diameters from 250 to 1000 mm.